Vertical Conveying Solutions

High Profile Factory Mass Flow Spiral Acceptance Test

Tall Stainless Steel Mass Flow Spiral ConveyorWe recently conducted a comprehensive factory acceptance test (FAT) on two tall stainless steel mass flow spiral conveyors for a major food manufacturer. These two spirals will handle full jars of various sizes at a rate of up to 750 jars per minute. The spirals will decline from 21′ –  5″ to the floor level. The spirals feature 16″ wide slats and have 11 1/2 turns declining at an angle of 4.2 degrees.

The customer had developed a comprehensive test protocol to verify that the spirals were manufactured to meet their design and performance specifications. This included an 8 hour dry run during which time critical operating characteristics were measured.

The integrator on this project is the Dennis Group of Springfield MA. The order also included two 16 foot tall case spirals with 16″ wide slats. To view video footage of the Ryson Mass Flow Spiral conveyor, visit Ryson’s YouTube Channel.

Latest News

Sep 13

Ryson Busy Trade Show Season

The fall is a big season for trade shows for Ryson. It is always exciting to get out there and meet new prospects and connect with our Integrator Partners.

Read More>
Sep 6

Bag Handling Spiral Conveyors

Most people think of cases and totes being handled on Ryson Unit Load Spirals. They are also very capable of bag handling and large pales.

Read More>
Aug 29

Ryson Backs its Products with a Fully Stocked Parts Inventory

One of the major value-added features about working with Ryson is that we have a fully stocked parts inventory in our Virginia Plant.  We have a dedicated staff to answer your questions and if spare parts are needed, we could have them to you by the next day.

Read More>