Jan 18

The Ryson Narrow Trak Spiral is ideal for a high speed inline bottling operation. Due to it’s modular design, it can be configured to the most challenging layouts. We also have the flexibility to build a spiral in sections to address tight egress installation challenges.

Ryson Narrow Trak Spiral aids in Tight Egress InstallationThis week we shipped a spiral that is a perfect example example of tight egress installation . Due to plant and line access issues, the spiral has to travel down an aisle-way only 42” wide. This required us to design the spiral such that it could ship in (4) sections (note the flanges in the center tube). This Narrow Trak Model 1100-150 spiral is for our Integrator Partner, Sentry Equipment, to be installed at a west coast bottler, running sports drinks in PET bottles at 525 per minute.

The spiral has an elevation change from 15’-4” down to 6’-6” and will side transfer and decline the bottles at a speed of 180 FPM (this spiral has a top rated speed of 220 FPM). The spiral will be run in and tested with product at our manufacturing plant in Yorktown, Virginia, before it is dis-assembled and shipped to the west coast. Then one of our service technicians will assist the Sentry millwrights in the assembly and start-up.

The spiral is also pre-wired with NEMA 4x controls and is built as our new Hybrid stainless steel wash down construction. This option allows the end-user to perform a daily cleaning of the spiral. The nesting slats have the capacity to reliably end-transfer small cartons and packages or side-transfer small bottles or containers in a single file or in a continuous mass flow.  The spiral conveyors are equipped with our new 6” or 9” wide nesting slats which provide an efficient flat conveying surface without gaps.

For more information on our Narrow Trak Spirals, visit www.ryson.com, download the NT brochure or read more application stories on our weekly blog.

Post to Twitter

Apr 04

The Ryson modular design enables a large degree of customization. This feature is what allows spirals to be built with various heights, pitches and speeds with few unique parts. This feature is also beneficial when modifications need to be made after the spiral is built.

Ryson Modular DesignThe following example is a real-world example of how this feature was used to save the day.

Wednesday night: We get a call about 6:00 pm from our integrator, who’s just stood up our new spiral at the end-user’s facility in Ohio.  The Integrator realized he’s made a mistake and mistakenly quoted and signed the approval drawings for a spiral with a discharge height of 12’-6”, when he really needed 10’-6”. The spiral was shipped complete with a full Nema 4X control system and the line was being installed, with line start-up just days away.

Thursday morning: Our service and engineering departments went to work and figured out how we could field-reconfigure the spiral to get his correct elevation. We overnight new recon details to the integrator on-site.

Friday morning: Our technician arrives at the facility and reconfigures the spiral and helps with the start-up of the spiral, while training the end-user’s maintenance staff.

This is a true story, no names were mentioned to protect a project engineer and save his reputation with his customer.

For more information on the features and benefits of the Ryson modular design Spiral Conveyors, visit www.ryson.com, or read more installation stories on our weekly blog.

Post to Twitter

preload preload preload